Australian owned · SIRA fuel reconciliation

From Dips to Compliance: How SIRA Actually Works

How SIRA works, from daily dips to a monthly compliance report

For the site, SIRA should be simple: a few minutes a day with a dip stick. Behind that, the analysis is anything but. Here’s how SIRA works, step by step, from the dip to the report in your records.

Step one: five minutes a day at the site. Each day, someone records three things for every tank:

• the closing dip, taken at the same time each day

• any delivery, entered on the day it arrives at the docket figure

• the day’s sales for that tank, from the POS

That’s the site’s whole job. No probes, no extra hardware. It goes straight into TankTrace, which shows the running variance as you go.

Step two: why a spreadsheet can’t do this. On paper, today’s dip should equal yesterday’s dip, plus deliveries, minus sales. In practice it never matches exactly. Dips are read to the nearest few millimetres, meters have tolerances, fuel expands and contracts with temperature, and deliveries don’t always land when they’re entered. A tank can read 300 litres short one day and 280 over the next with nothing wrong at all. Adding up the differences doesn’t tell you whether you have a leak. Separating a real loss from that day-to-day noise is a statistical job, and it’s where the work starts.

Step three: the analysis. The statistical inventory reconciliation methodology applied by TankTrace runs every tank through a series of calculations each month:

• Trend detection across the whole month, measuring whether the tank is drifting in one direction more than measurement noise can explain

• A detection limit calculated for each tank, each month, from its own data, so a quiet 9,000 L tank and a busy 50,000 L tank are each judged against what their data can actually support

• Testing against the AS 4897-2008 threshold of about 0.76 litres an hour, or roughly 18 litres a day, small enough to catch a leak long before it becomes a clean-up

• Data quality checks that pick up poor dips, stale or repeated readings, deliveries entered on the wrong day and keying errors, so one bad entry doesn’t produce a false alarm or hide a real one

• Comparison with the tank’s previous months, so a slow trend that repeats is picked up even when each month on its own looks borderline

Together, these make up TankTrace’s proprietary analysis: the calculations we’ve built and refined over thousands of tank reconciliations to pick up fuel loss as early as possible, so a leak is found while it’s still small and cheap to fix. If the data isn’t good enough to give a confident answer, the result is Inconclusive, with the specific readings that caused it, rather than a guess.

Step four: an analyst reviews it. Calculations flag; a person decides. Every result is reviewed by our analyst, Krystal Moujaber (AIDGC), before the report is issued. She reads it against the site’s history: a delivery keyed on the wrong day, a new tank settling in, two connected tanks moving together, or a genuine loss that needs a phone call. If something needs fixing, the report tells you what it is and what to check, not just Pass or Fail.

Step five: the record. Each month closes as Pass, Fail or Inconclusive, with plain-English notes on anything worth your attention. Keep the reports for at least seven years (ten in Tasmania; see the rules in each state). That stack of reports is what you show a regulator, an insurer or a buyer when they ask what monitoring you had in place.

Overall: five minutes a day at your end. At ours, a month of data per tank put through detailed statistical analysis, checked against the tank’s own history and reviewed by a qualified analyst. That’s the difference between a spreadsheet and a SIRA report.

Questions about SIRA? Talk to us. TankTrace does more than produce monthly reports. Our team can help with anything SIRA or compliance related: getting your daily dipping routine right, what a result means, or what to do when one comes back Inconclusive. Call us on 1300 521 401, email [email protected], or see our pricing.

Share this article

Monthly SIRA service

Regulator-ready reports, reviewed by a qualified analyst.

$21From, per tank / month, ex GST

Picture of Dan Armes

Written by

Dan Armes

Dan leads marketing, technology, and customer relationships for TankTrace. With deep connections across Australia’s independent fuel network, ServoPro ensures TankTrace gets into the hands of the operators who need it most.

Ready to simplify compliance?

Stay compliant without the hassle. Australian owned, Australian support, when you need it.

Call the team